HOW TO INSERT COMPANY LOGO

Using Adobe Acrobat you can use the "Edit Text & Images" feature found under "Tools" and "Content Editing". Alternatively the "Add Image" feature can be used. If you don't have Adobe Acrobat, other PDF editing software will have similar capabilities.

Recommended logo size is approximately 600*150 pixels. Other sizes can be used and re-sized when inserted.

If you require assistance please send a copy of your logo and your purchased WPS to info@weldspeconline.com and we will enter the logo for you!

METRIC-IMPERIAL CONVERSION GUIDE
Millimetre [mm]Inch ["]Celsius[°C]Fahrenheit [°F]
0.81/321050
1.23/642070
1.51/1638100
2.53/3250120
31/865150
45/3295200
53/16120250
5.57/32150300
61/4175350
85/16205400
103/8230450
117/16250480
131/2260500
149/16290550
165/8315600
1711/16345650
193/4370700
227/8400750
251425800
291 1/8455850
321 1/4480900
381 1/2495925
502510950
572 1/45401000
642 1/25651050
7535951100
893 1/26201150
10046501200
1144 1/26751250
12559801800
150610401900
200810952000
--11202050

Information taken from ASME IX Appendix G

For the millimetre [mm] to inches ["] conversion values there is a tolerance of -5% to +5.5%.

For the Celsius [°C] to Fahrenheit [°F] conversion the values have been rounded to the nearest 5°C/°F.

Metric-Imperial Conversion Guide - PDF Download

STAINLESS STEEL WELDING CONSUMABLE GUIDE

Recommended welding consumable grade for welding 300 series austenitic stainless steel materials:

 304304H304L309316316H316L
304308

(or 316L)

------
304H308H308H-----
304L308L308L308L

(or 316L)

----
309308H308H308H309---
316308H308H308H316H316H---
316H316H316H316L316H316H316H-
316L316L316L316L309L316L316L316L
Carbon Steel309L309L309L309L309L309L309LMo

Table contents taken from AS/NZS 1554.6 Table 4.6.1.

For dissimilar metals, welding with the grade listed at the intersection of the row and column is recommend. Both this grade and the grade in blue on the intersection row are suitable -  e.g. for welding 316L to 304L, use either 308L or 316L consumables.

Example: for welding carbon steel to 316L you can use 309LMo or 316L grade consumables - e.g. for MMAW you can use E309LMo-xx or E316L-xx and for GTAW you can use ER309LMo-x or ER316L-x.

FCAW WELDING CONSUMABLE GUIDE

E70T-1 consumables are designed to be used in the flat position.

E71T-1 consumables are designed to be used in all positions.

The -M suffix means that a mixed gas should be used, such as an Argon/CO2 mixture.

The -C suffix means that CO2 gas shall be used, such as 100% CO2.

For all consumables, manufacturer recommendations shall be adhered to.